#MP C305 MAC NETWORK SETTINGS INSTALL#

Before you configure wireless IP settings, install the Xerox Wireless Network Interface, then connect to a wireless network. Note: The device uses separate IPv4, IPv6, and DNS settings for wired and wireless network connections. For Network, for a connection type, click Edit.If suitably configured, routers respond to this request with a router advertisement packet containing network-layer configuration parameters. Multicast router solicitation request for configuration parameters. When first connected to a network, a host sends a link-local ICMPv6 performs error reporting for IP along with other diagnostic functions. IPv6 hosts can configure themselves automatically when connected to a routed IPv6 network using the Internet Control Message Protocol Version 6 (ICMPv6). Logout as Administrator at the Embedded Web Server (EWS).Note: If you select Default All, the device sets the IPv4, IPv6, and DNS values as the default settings. This option instructs the device to assign itself an address when a DHCP server does not provide one. For Zero-Configuration Networking, for Self Assigned Address, select Enabled as needed.Enable broadcast when your DHCP/BOOTP server is on a different subnet than the device and communicates through a relay agent router. Note: If the device does not obtain an IP address from a DHCP/BOOTP server, enable broadcast. For Broadcast, select Enabled as needed.Type a Machine IP Address, Subnet Mask, and Gateway Address. STATIC: This option disables dynamic addressing and allows you to type a static IP address.The printer requests that the server register the IP address and hostname of the printer with the DNS server. This option permits the printer to obtain an IP address from a BOOTP server that is configured to accept DHCP requests. DHCP: This option permits the device to obtain an IP address from a DHCP server.BOOTP: This option permits the device to obtain an IP address from a BOOTP server that does not respond to DHCP requests.For IP Address Resolution, select an option.To configure IPv4, click Show IPv4 Settings.For Configuration Settings, next to IP, click Edit.Note: The device uses separate IPv4, IPv6, and DNS settings for wired and wireless network connections.īefore you configure wireless IP settings, install the Xerox Wireless Network Interface, then connect to a wireless network. For Network, next to a connection type, click Edit.In the Embedded Web Server, click Properties→ Connectivity→ Setup.

For additional information, click on Access and Login or Logout as System Administrator at the Control Panel or Embedded Web Server (EWS). Login as Administrator at the Embedded Web Server (EWS).You can use IPv4 or IPv6 in addition to or in place of the other. If your printer has a valid network address, you can configure TCP/IP settings in the Embedded Web Server. Logout as Administrator at the Control Panel.Touch IPv4, then type the IPv4 Address, IP Gateway Address, and Network Mask Address.Touch Network Settings→ TCP/IP Settings.At the control panel touch screen, touch Device, then touch Tools.Login as Administrator at the Control Panel.If you are using DHCP, it is recommended to reserve the IP address assigned to the device to prevent future interruptions to print and scan functionality.Ĭontrol Panel Configure, Modify or Verify the Network Address Manually (Static).If TCP/IP is disabled, you cannot access the Embedded Web Server (EWS).

If this is the first time the device is being configured (initial install), the TCP/IP information must be configured from the Control Panel.

Select your preferred method to configure, modify or verify the setting. This setting may be configured from the Control Panel or using the Embedded Web Server (EWS). Internet Protocol (IP) is a protocol within the Internet Protocol Suite that manages the transmission of messages from computer to computer.

Mp c305 mac network settings